Product Data Sheet Brouchure

Bamboo Poles

Name: Bamboo Poles
Brand: House of Bamboo
Availability: InStock

A refined expression of nature’s strength, Bamboo Poles offer architects and designers a renewable structural material with both performance and beauty. Naturally tapered with distinctive nodes, each pole embodies the organic rhythm of bamboo while providing exceptional versatility across built environments.

Sustainably harvested, our poles exhibit a compressive strength greater than many light steels while maintaining 30% less weight. The result is a high strength, low-mass material that simplifies fabrication and installation without compromising aesthetic or structural performance. The poles vary in width and taper from one end to the other, with one end having closed nodes. Offered in a range of diameters and finishes, bamboo poles are suitable for both interior and exterior applications where warmth, texture, and ecological integrity are paramount. Their carbon-negative life cycle and full FSC® certification make them a responsible choice for projects committed to sustainability and design innovation. The carbonised poles have had the sugars removed which helps sustain them in humid and demanding environments.

A$9.54

Price in AUD, excl. GST

Rod Pole Size:20-25mm Pole

20-25mm Pole

25-30mm Pole

30-35mm Pole

40-50mm Pole

50-60mm Pole

70-80mm Pole

100-120mm Pole

Product colour:Carbonised

Carbonised

Natural Pole

Not currently available

Enquire About Availability

Product Type: Natural bamboo poles and slats
Series: Natural | Organic (Bamboo Poles, Half, Slatted)
Lengths: 3000 mm standard
Diameters:
- Whole Pole: 30–35 mm | 40–50 mm | 50–60 mm | 70–80 mm | 100–120 mm
- Half Pole: 80–90 mm
- Slats: 2100–3000 mm (L) x 20–45 mm (W)
- Masawari: 2700 mm (L) x 50 mm (D) or 70 mm (D)
Finishes: Raw, Carbonised, or Custom-stained
Nominal Thickness: Poles are up to 10mm.
Nominal Mass per Unit Area/Density 5kg/9.15m2
Fire Rating: Class 3 (AS/NZS 5637.1–2015)
Indoor Emissions: Class E1 ( < 0.124 mg/m³) [EN 717-1]
Durability: Class 1 (EN 350 / CEN/TS 15083-2)
Weight per piece: 0.52–6 kg depending on diameter

Allow material to acclimatize for 48–72 hours before installation.
Cut ends should be sealed to prevent moisture intrusion.
Use stainless steel or galvanized fixings suitable for bamboo and timber.
Apply UV-resistant oil or protective finish for exterior exposure.
Ensure adequate substructure ventilation and drainage in screened or cladded systems.
For best results, consult design guidelines per Australian Standards prior to installation.

External applications: Reapply protective oil every 12–18 months, depending on exposure.
Internal applications: Clean periodically with a non-abrasive bamboo-safe cleaner (minimal maintenance required for internal applications).
Avoid harsh solvents, acids, or abrasive tools.
Inspect joints and sealants annually for wear or moisture ingress.
Minor surface marks may be lightly buffed and resealed as needed.